Showing posts sorted by relevance for query hypermesh. Sort by date Show all posts
Showing posts sorted by relevance for query hypermesh. Sort by date Show all posts

Thursday, July 17, 2014

Fwd: Urgent Requirement of 2-5 year exp. in Hypermesh

Hi All,

For your information and action if applicable


Cheers
Sukhbinder

Sent from my iPhone

Begin forwarded message:

From: abhishak saini <abhishak.saini@beanalytic.com>
Date: July 17, 2014, 11:31:30 AM GMT+05:30
To: Rakesh Kumar <aerorakesh@gmail.com>, Rakesh Kumar <secretary.aesiaa@gmail.com>, sukhbinder.singh@gmail.com, gie.endeavour@yahoo.com
Subject: Urgent Requirement of 2-5 year exp. in Hypermesh


Dear Sir/ Madam,

We have urgent opening for Hypermesh (meshing tool). We are looking for 2-5 years experience candidates who have good hand on experience on hypermesh tool. Knowledge of any solver will be an advantage.

Please Send the resume to  anilkr.ammina@beanalytic.com  and  suresh.patri@beanalytic.com . 

Contact us : 080-65470039 

Please inform others.

Best Regards,

Abhishek Saini
Reliability Engineer
_____________________________________________________________________________________________

                                
BE Analytic Solutions, 77, SRR Layout, Mahadevapura, Bangalore 560016, India 
Desk: 080-65470039 / Mob: +91-8792890197,8553883928 / Fax: +91-78385 93998 / www.beanalytic.com


Thursday, June 19, 2008

Some useful jobs links for aesi aerospace graduates

While i was working in NAL as project training engineer, i saw that there were these five tools that most of the trainee were really working on.

Hypermesh,catia, solidworks,labview and nastran! So i guess most of the folks that are in NAL or other institutions, they might be searching jobs in this skills. So here i have mashed up some links that will make finding aerospace related jobs with these specific skill set. Click on the links given below to check the jobs available in indian aerospace industry for your skill which might be hypermesh,catia, solidworks,labview and nastran.


These links will also be useful for other other aeronautical engineer, new aesi graduates searching for aerospace jobs or aesi non-graduates as they can see what the indian aerospace firms are looking for. And they can prepare themselves with this requirements in mind.

Jobs in hypermesh and aerospace
Jobs in catia aerospace
jobs in solidworks aerospace
jobs in labview and aerospace
jobs in nastran and aerospace
Jobs in HCL can be found here.

Please keep in mind this is an experimental links, so sometimes they might not fetch the required jobs, please let me know in comments so i can fix them. thanks and happy job hunting!!!

You might also check the resume writing, cover letter section of this blog for more job search tips.





Friday, August 21, 2009

Secret of being a successful designer, analyst or programmer

Learn by doing not collecting.

This is the only secret of any successful programmer, designer or
analyst. They all learnt by doing.

Just collecting tutorials, googling catia hypermesh models, torrenting
vedio tutorials won't move you anywhere. Only thing that will help is
doing. Creating models in catia, meshing models in hypermesh, and
analysis in ansys or nastran will teach you more than reading heaps of
tuturial material.

So ask yourself are you doing or collecting?

The sooner you begin doing the faster you will get to master the tool.

Liked this post, please consider subscribing to my-aesi blog by
visiting http://feeds.feedburner.com/myaesi

Related catia or computer aided engineering stuff can be found by
clicking on the following link

http://my-aesi.blogspot.com/search?q=CAE

Tuesday, August 05, 2008

Concentrate on One Main to get maximum out of your training


I few days back i wrote a piece titled 7 simple steps that will help you get maximum out of your training. In it i promised to elaborate the points so here we go.



AS I have said earlier. Training has increased my skills, polished my knowledge and boasted my confidence. Though I was lucky to have DR. Ramamurthy, a hard taskmaster as my guide, I feel this 7 simple tips that follow will be applicable to everyone who is doing training no matter who is his or her guide.

So without further adieu let me begin

Concentrate on One Main Thing.
Concentrate on one main area of work during your training. If you want to be in design and then focus on design and if you want analysis, then focus on analysis. If your interest is programming then focus on that. Now as I have said earlier in this post, one needs to be clear about his motivation before joining training. IF that is clear then you will have no problem in focusing on your job at hand. See when I was in NAL, I have seen few folks not focused on there task and always grudging about the cool task the other person is doing in HYPERMESH. Yes it’s good to be fascinated with the software that your college or friend is working on but don’t loose your focus.

If you are already know what you want out of the training then you‘ll have no difficulty in staying focused.

What are the consequences of not staying focused?

  • You loose interest in your main task that you have been assigned.
  • Your work doesn’t reflect the true potential that you have.
  • Since you began with one topic and now drifting to difference software or task, chances are you have two half-baked software skills. If might look on resume but might glaringly come out when you are in a technical interview.


So what can you do?

3 simple steps.

  • Before joining any training know why you are joining? Have a clear goal for your training. If you don’t have a goal, Do it now. See what you want to take away from this training? Write that purpose down. Make it short but write it. In my days of training my focus was to apply my aeronautics knowledge and to create software aerospace or engineering tools. And I concentrated my maximum time on the activities that lead to me to fulfill my focus area.

  • Now when you know you are to focus on one area of your training, chalk out the activities that you need to do. Some will be related to the task you are assigned by your guide. Align them to your focus area. One of the tasks I got while in NAL was development of an access database for the account database. So where was my aerospace knowledge here? Since I was assigned to do this work, I learned access to accomplish this and then applied this access learning skills to create a database of all the data of military engines that I had for my work on gas turbine engine of a UAV. So work with your focus area always in your mind.

  • Get a small percentage of your time to do that fascinating thing that that your friend on the next computer is doing. Yes programming and making software tools was exciting, but seeing my friend doing magic and creating all those colorful graphs in fluent was also mesmerizing. So everyday I took half an hour and tried my hands on that software if I got the change. This is how I tried so many software including NASTRAN, HYPERMESH, UNIGRAPHICS, GAMBIT etc. Doing this not only gave me a welcome relief from my work but also opened up opportunity to see how my primary focus area skills can be applied to this software.

So these are my thoughts on the training. This post itself got longer than interned. So I’ll be post the other tips for getting the maximum out of your training in my next post.

Related : 3 things i have learnt in NAL during training!





Wednesday, January 21, 2009

Building a better Aerospace Engineer

In the latest issue of aerospace America, Thomas S. Momiyama, a U.S. Senior Executive Service has this to say in the editorial on building a better engineer

Information technology is not a magic bullet. Computers may have replaced slide rules, but nothing will replace providing tomorrow’s aerospace engineers with the opportunity to hone their skills in
basic technologies and to learn from others with true hands-on experience.

This resonates with my view. Importance of these view has already been noted here in this blog when i emphasized that computer software’s are just tools, means to the goal, cars for the journey to the destination.

Hand calculations, internal understanding and having the knowledge to relate small things to the big picture are the abilities that AeSI or any  engineer should have and cultivate

Presently i am assigned a FEM software tool, so what is the most important thing for me in it. The most important thing from it is not how best i can mesh or nor is how best i can represent the physical model to the fem counterpart. But the most important part is how i understand and interpret the results it gives. That where my expertise, experience and knowledge will be useful. Yes well formed mesh and good representation of the model are necessary and are vital for accurate results but its the understanding and the interpretation of the results that’s far more valuable.

So as you learn the tools, whatever it might be catia, solidworks, ansys, nastran, gambit, hypermesh or UG etc. Just remember that those are just tools in the hands of an engineer, they aid you and not the other way round.

What are your views on this please do replay in comments, what you think of this tools and what tool are you working on for this year?

Thursday, October 01, 2009

12 CAE interview questions to prepare for

Arvind Pandey is working on CAE software in NAL and he has send me 12
questions that he was asked in his cae interview. He wants them to be
shared with you all.

So here they are.

1. What is hypermesh?
2. Why it is called hyper? Why not anything else?
3. Why meshing is needed?
4. What type of elements are created by meshing?
5. What is dof?
6. What is degree of freedom of a plate element?
7. What is post processing? Why it is needed?
8. What is IGES?
9. What steps will you follow to do stress analysis if we give you an
iges file?
10. How to apply boundry condition and how do decide which boundary
conditions you will apply?
11. What are the common material properties that you can apply on a
model?
12. What is youngs modulus and density of steel and aluminium?

Thanks Arvind!! Keep up the good work.

More CAE/CAD related posts at http://my-aesi.blogspot.com/search?q=CAE


Receive posts in email or google reader http://feeds.feedburner.com/myaesi

Monday, March 22, 2010

Consistency

A couple of days back I read the following text somewhere and I
collected it as text file for my quotes log that I am keeping.

It has a great point and if we can understand this we can greatly
improve our performance in study and job.

"The key to getting better is consistency of effort…not consistency
of results. Consistency of effort leads to growth which leads to
consistency of results."

Yes be consistent in your efforts. Not consistent in your results.
That will follow. But aim to be consistent in efforts.

Consistent in studying for two hours per day, consistent in doing
catia, ansys tutorial one hour per day, consistent in learning fortran
or VBA, one hour per day.


This is the consistency of effort. Putting in the time. Tearing
yourself from an IPL match to put in that agreed hour. Gluing yourself
to the hypermesh tool for that extra out of work time.


Endevour to be consistent in your efforts.

Thursday, April 15, 2010

What tools to learn in avionics stream?

A recent mail from the reader of this blog has this question.

"I am in section B and have avionics branch, so what extra course i
can do which is helpful for my career!"

I guess I talk about catia, solidworks, ansys, ungraphics, fluent,
hypermesh etc but I rarly talk about anything realated to this stream
that many in AeSI take.

Before I lay my two thoughts on this subject here, I would like you to
point you to find the old articles in this blog that might help you.

You can find them by clicking this link http://my-aesi.blogspot.com/search?q=avionics


Well that being said, I would like to add that first and foremost take
up c language and start learning it from now starting today. Don't
worry about when and where just resolve that this is one language you
want to master while still pursuing this stream.

And second thing, search for some good blogs or websites that talks
about this subject. Subscribe to them. Read them everyday. You might
not understand everything written in that. That's ok. Just be a part
of the team. Join avionics groups in yahoo, google and linkedin.

Do this two things consistently and do it with a sense of mastering
them, you will require no additional advice from anyone to have a
great start to your career!!

Hope this helps and don't forget to tell me how it goes.

And better still start a blog about your adventures in this stream!! I
would love to hear your experiences.

Good luck!!

Find more avionics related posts
http://my-aesi.blogspot.com/search?q=avionics

Monday, February 08, 2010

Soak yourself for remarkable career!!

Success in any field or career is possible only if you soak yourself fully in that career or filed.

You can bath properly in a pool only if you are willing to immerse yourself fully in that pool.

Total immersion is prerequisite to be good in what you do. From catia to hypermesh, from Fortran to fluent CFD, soak yourself in the knowledge centres of your chosen tool.

For being a good Fortran user, I need to not only code in it but stay in touch with different standards, to be remarkable in this a chosen tool, I not only know what is needed for my current job but explore topics far outside my work zone.

It's just not possible to be just good now a days, you have to be remarkable for that you have to immerse yourself fully in your chosen choice.

Read more on career and how to succeed by clicking http://my-aesi.blogspot.com/search/label/advice

Read more

 

Thursday, March 11, 2010

How racing against time can help you learn catia better?

Racing again time is the most effective technique that you can apply
to your study or in learning a new software tool like catia, ansys,
hypermesh etc or computer language.

Constraining the limited amount of time you can work, you create a
positive pressure on your brain to learn and do the same task quickly.

It's like compressor of a gas turbine. The higher the pressure ratio
the higher will be the thrust or output. So constraining, limiting and
putting a chain around the task pushes your mind to a zone where it's
more creative and it does accomplish much more.

It's far far better to study for one hour with single minded focus
than chipping on the the book for the whole day hardly taking anything
in. It's far better to crack two tutorials of a software of Catia or
ansys in an hour than tinkering with the software for the whole day.
It's far better to practice ten input output related simple programs
than thinking whole day about your next big program.

The point is put time constraint in your work, study and everything
you do and you will see that you are doing better.

And what more you are gaining few extra hours in a day.

This blog post was also an exercise in the power of constraint.

Find more tool and study related hacks by clicking the following link http://my-aesi.blogspot.com/search?q=advice

Sunday, June 15, 2008

Tools of aerospace industry


This is a list of tools that i have seen in aerospace industry. See how many of them you know of?


CATIA

NASTRAN
ANSYS
SOLIDWORKS
ABACUS
pro/e
unigraphics
labview
matlab
excel
hypermesh
fluent
ICEM
ISIGHT

I know this is not complete yet, help me grow this list. Add the others tools that are used in aerospace industry. Add them in the comments.

Saturday, May 22, 2010

CAE packages widely used in the aerospace industry!!

Here's another gem of a post from ouraesi from Mr. Bhushan!! In this
post he highlights many CAE packages being used in the industry.

As he rightly said, choose ONE of them and let it jump start your
career.

With any delay, here's the complete text of the email

"

Hi Guys,

In last couple of years there has been a lot of opportunities for AESI
fellows. Thanks to many; who still extend their help generously.

It's often become complicated to decide on future plans after section
B. Not all but few prefer higer studies after graduation but still
there are many who struggle alot to finalize their goal.

Apart from higher studies, one can seek knowledge in various analysis
packages and move ahead as a professional analyst. But make sure you
are on a right track while selecting these packages.

Please find following packages which are widely used in industry for
an analysis.

Structure - Ansys Mechanical, LS- Dyna, Nastran, Patran,
Abaqus
Fluid Dynamics - CFX, Fluent, Star-CD
Hydrodynamics - AQWA
Meshing - HyperMesh, Ansys Meshing tools, Tgrid
Robotics - DELMIA Robotics (Dassault system)
Electromagnetic - Ansoft products (Maxwell, Q3D, HFSS)
Manufacturing - DelCam

Modeling - There are many packages like CATIA, PRO-E,
Solid works, Rhino Ceros, Ideas, UniGraphics

This is a partial list of widely used packages across different
countries. You can find many packages in industry. Please, evaluate
them before you choose one for your future area of interest.

Best Regards,
Bhushan

"

Thank you Mr. Bhushan! Contribution from members like you extend the
vision that ouraesi group was formed for 9 years ago!!


Find more gem of ouraesi articles by searching http://my-aesi.blogspot.com/search?q=ouraesi

Wednesday, June 16, 2010

11 softwares in 6 months !!

A few weeks back I had an email exchange with a recent graduate of
AeSI. In the discussion he spelled out this plan.


I have decided to take a six month course from CENTRAL INSTITUTE OF
TOOL DESIGN HYDERABAD that is giving eleven softwares as catia, ansys,
nastran, proE, ug, autocad, hypermesh, solidworks, autodesk inventor,
mastercam, delcam and nc-cnc programming for Rs.40,000/

I asked so which tool are you planning to learn. He said they will
teach him all!! I was speechless.

11 softwares in 6 months!!

If I were him, I will not go for this. Instead I would concentrated on
one and two softwares!!

It's like cooking lunch on 11 gas burners, and alternating every few
minutes to a different one until all are touched.

It's like having 11 balls in a soccer match!! This is madness.

Are you doing anything like this? Then stop. And reassess, something
is wrong there!!

About 400+ people have downloaded the free ebook on AeSI? Are you one
of them? If not download'After AeSI- career guide to AeSI' from
MyAeSI now!

Tuesday, February 24, 2009

The Impact Comes From The Craftsman,

Just like every powerful tool, the impact comes from the craftsman, not the tool. -Seth Godin

Just read  this blog entry from marketing guru Seth Godin and loved this line. and its very true. True for all the things that I advocate in this blog. Catia, Solidworks, Ansys, Nastran, Unigraphics, Hypermesh, Fluent, ICEM, Isight, Gambit,Patran etc are powerful tools but that power doesn't come by itself, it comes from the users who uses it.

tools-don't-make-the-impact Its not the tools that create great things, its the application by the "craftsman" who makes wonders with them.

Always remember this when you are playing and handling your tools. You are the driver and where the vehicle will go is always in your hand and how skilful you are in it.

Same can be said for the slumdog film, there was nothing spectacular in the script, simple characters, simple scenes but the directors use of scene, screen play and  treatment made all the difference.... The camera, the technicians and the locations were all same that you will find in any Ram Gopal Verma's film, only thing that made slumdog great was its application.

So whenever you are looking at your tools, go forward with this attitude. You will surely win your Oscar!!!

related:

Tuesday, February 16, 2010

Show your benefits not features

Now what do you mean by this? What does this say? What are your features and what are your benefits?

In your resume, don't cram it with all the skills that you have? Be relevant. Don't state all your experiences in one resume. Be relevant.

Skills can be HTML, fortran, catia, ansys, hypermesh etc. Experience can be in meshing, gas turbine performance or compressor design. Depending on the job requirement , your skills, your project and your experience can become a benefit or just remain a feature.

The higher the benefit you will show greater is your chance to get that job. So after requirement study, always do a benefit vs. feature analysis of your resume and shift the balance as required when you begin updating your resume.


Jobs don't come on features, they sprinkle from benefits that this features provides to the employer.

You won't get a job by convincing them that you need the job, you get it by making them realize that they need you!!

Good luck!!

This is a post in the series update your resume. Find other posts related to this series by clicking update your resume

Sunday, July 05, 2009

Easy stuff or difficult stuff!!

Both of them are important, both have their own value, both can teach
you valuable lessons.

Doing easy stuff gives you the motivation, energy and spring you to
bounce back. While doing hard stuff enables you to learn new things,
helps you keep active and help you to challenge yourself.

So always mix hard and soft stuff. Have hard and easy stuff in your
life. A healthy dose of both is essential. They will increase and
perpetuate your knowledge. So how do you apply this in your studies,
training, and job.

In studies always make sure you are studying something new everyday
and revising something that has been studied. Revising is easy just
rehearse what you have learnt in the previous day. This mixes the
whole routine and helps you get more out of your study time.

In training, the same core principle applies, add new skill and
explore the already known skills. If its catia, then pracitise the
same old loft but find out about the cloud point import. Similarly in
hypermesh do Old and new stuff together. This will help you get the
best of the software. And learning will be much more rounded.

In job don't remain stagnant, stir things up weekly, make a
presentaion, develop a company specific tool and basically take
initiative at new things while contributimg towards the daily work
assignment

So mixing hard and soft has advantages and if applied inteligently can
earn you successful degree, fruitful training and a sparkling career.


For reading more tips on career do click the following links.

Http://my-aesi.blogspot.com/search/label/advice

Http://my-aesi.blogspot.com/search?q=career

Http://my-aesi.blogspot.com/search?q=catia

Http://my-aesi.blogspot.com/search?q=training

Tuesday, March 30, 2010

One powerful Lesson from learning solidworks for learning your fav CAE tool

Learning any CAE software like catia, UG, hypermesh, solidworks, ansys
etc is lot like learning a foreign language. The more you practice it
in real-life situations, the better you become at it.

So what are you doing about it?

What is your strategy of learning your favourite cae program?

I will illustrate mine. In NAL I became fasinated with solidworks. It
was the primary cad tool in my lab and glancing at the cad operators
from my desk, I was always drawn to the fasinating tool.

So first thing I did was I asked for a demo from the cad folks and
asked them to point me to the tutorials. Once I had a look at those
tutorials and I began practising them. I began to venture out.

In my quest to learn the software, this tutorials were roads and
tracks laid down for me. As long I travelled on them I was doing good
and feeling confident but I was not confident to take a new design. So
along the way I began deviating from my path, I began exploring the
sideways. I delayed replaying the tutorials and began making household
utentils. Cups, plates stoves, replaced the bar coils and nuts and
bolts of the tutorials.

To cut the story short, my decision to do real life articles and stuff
enabled me to learn the software much more quickly.


So the whole point of this post is this. Don't be just a fan of the
tutorials. Walk on them, they are generally the best source of
learning but don't always keep to the roads and venture out to the
side walks and explore.

Keep aside the tutorials and try things from your world. Create cad
model of your study table, analyze the load of your bike etc.


Its truly like learning a new language, unless you practise it out
with the world, you won't be learning it enough!!

Wednesday, December 28, 2005

Gambit

Well till yesterday, i didn't know what was this, till yesterday, before manas Bhaiya, talked i knew nothing about it. Its a software complimenting fluent. Like hypermesh as manas da poiTed out

Tuesday, September 02, 2008

Quantity or Quality....

What's more important during training while learning design software's like catia, solidworks or analysis software like NASTRAN,ANSYS or any CAE software? What will you choose Quality or Quantity?

I'll choose Quantity? Why?

For getting the maximum out of  your training, focus on the quantity. Make a commitment that you will produce one catia model,one mesh every day.  One per day is much more effective and successful strategy than focusing on quality and trying to perfect one model or mesh for weeks. Quality is important and is an essential part but a daily commitment to quantity is the way that will help you learn and achieve more. This encourages you to experiment, to go ahead and make something, make more mistakes and learn more. so whatever you are doing strive more to produce more... quality will eventually follow!!!!

If CAD program is what you are learning, commit to produce one model everyday. Don't worry if its perfect of not but keep churning out... every single model you will produce will teach you a thing. So go ahead produce.. Same goes for NASTRAN, ANSYS, HYPERMESH or fluent or any other CAE that you are learning.

Wednesday, July 23, 2008

Tips for AeSI graduates for getting employed


In this series I am taking about steps that AeSI graduate or students can take so that they are employable once they completed their degree. This is part 4 of the series. You can read the previous 3 parts here, here and here.


What’s in demand is good but is it enough to get you into the aerospace industry? Training and experience is another factor. After AeSI, it takes at least 2+ months to get a job depending upon the profile of a person, this 2 months figure is based on my informal survey among AeSI people I know of. But the main point is not the two months what you need to do.

Well as stated before; begin your career planning in the beginning of your last semester. This is the time when you need to think where and what you want to be in the booming aerospace industry. You know your strengths. How you can add value to the company that will employee you. Yes you have the skills but are they applicable out of the textbook, here training in NAL, GTRE, HAL and anywhere you can get comes handy. I had mine in NAL and this has increased my skills many fold. It not only rejuvenated my propulsion knowledge but also polished my programming skills and added CAD skills to my repertoire.

Training has two advantage, one it helps you understand what the industry will be like when you are in, you can see that skills are okay but how to handle people and deadlines also come into being. Second thing is that it will make your skills more marketable. A person with catia and hypermesh skills and a person who has worked on catia in a live project is far more attractive to the recruiter.

My friend and I have this theory that if you want to learnt a cad or analysis software. You can do hundred tutorials but you will truly learn the software when you do a real life project. This is the one where you have no guidance and you are on your own and you get to learn the small things that a tutorial and book learning can never mention or show.


So apart from your skills, get trained. It might be in NAL or any other organizations which provide adequate facility for the AeSI people. And you don't have to wait for AeSI’s training call. You can begin this on your own initiative and give yourself a head start. Truly this is one thing that I will recommend every AeSI new graduate. I have written many more posts regarding how to get trained? Or things to consider before getting training do read them.

This series is not about my ranting about what I feel, I want you to take active part in it, suggest your suggestion. Tell us your five points so that AeSI students and graduates are more employable !!!






Search This Blog