Showing posts sorted by date for query avionics. Sort by relevance Show all posts
Showing posts sorted by date for query avionics. Sort by relevance Show all posts

Friday, July 24, 2015

Job Opening : Technical Author in Capgemini India

Dear all,

Capgemini India is recruiting "Technical Author - Avionics" for Aircraft Technical Publication Project. AeSI Avionics graduates (freshers) can send resumes to Mr. Himalya Bansal at himalya.india@gmail.com with email subject line as 'Resume_Capgemini' on/before Sunday July 26, 2015 06:00 PM.

The candidates should have completed the AeSI degree in the stipulated time. Above 50% average score is acceptable.

This is a part of co-initiative of AeSI Bangalore Branch and AeSI Alumni Association.

All the best !!!
Team - AeSIAA

Friday, May 22, 2015

Avionics Students : Opportunity to attend ESSS 2015 ?

UPDATE/AeSIAA/LDRA/22052015/001

AeSIAA has discussed in length with LDRA India and agreed to send 10 Avionics students (Sec. B) in the upcoming Embedded Safety and Security Summit (ESSS2015) to inspire Make in India Avionics designs. The details of this summit is available at www.embedded-safety-security.com and venue will be at NIMHANS Convention centre on June 17th 2015.

ESSS 2015 is actively supported from Industry Bodies like AeSIAA, SIATI, IESA , Regulators (CEMILAC, NTG & ARAI), IEEE, PSUs, DRDO, Armed Forces and most of leading technology companies like IBM, TI, NI, GreenHills, Mentor Graphics, MathWorks, Ansys, Esterel, Freescale, Keysight, etc. with speakers and support resources.

Eligibility Criteria for a complementary entry pass in ESSS-2015 Summit.

1) If you've outstanding performance in the Avionics stream.
2) If you've completed degree in Avionics stream (with good marks and outstanding performance/ track record) and are not employed.
3) if you've completed degree in Avionics stream and have good knowledge about avionics embedded systems.

We henceforth request you to send your nomination by Tuesday i.e. May 26, 2015. Nominations can be sent to Mr. Himalya Bansal at himalya.india@gmail.com

Thanks & Regards,
Team - AeSIAA

Monday, September 15, 2014

A way to celebrate Engineers Day

Every year on September 15, we celebrate Engineers Day. It's really a matter of proud but here with this post, we would like to ask you few questions.

Let's do an analysis of last 10 years of the AeSI students who were enrolled across various IITs for masters and doctorate degree vs. the innovations. We are confident that the analysis report will open our eyes. Getting a masters or a doctorate degree can certainly give you a good job with a handsome package but it can never make you an engineer. Government is paying you stipend not just to treat this as pocket money but to come out with some great innovations.

Think Big. Think Engineering.

3 ways to celebrate Engineers Day.

- Start using some part of your stipend in creating a small lab aerodynamic /avionics at your hostel room.
- Use your campus lab to do experiment by thinking out of the box. Example : Is this the only way to do the things ? If I do this, so what will happen ? What if I do this ? What if I change the parameters ? and the list goes on .... Take this experimental data in an excel and try to implement mathematics to find out a relation between your results.
- Create a small team of innovative scholars. Discuss with your professor, pick up a theme and take his help to bring out some innovative ideas into real time execution. We never know when we'll have a Newton or Einstein out of us.

All the best ! and we wish you all a very Happy Engineers Day.  

Saturday, April 26, 2014

What the avionics industry wants?

"Most recent graduates do not know what industry is looking for!" This is how it all started.

Mr. Rajesh Chaubey was recounting his recent interview experiences with the Alumnus of AeSI. He is an avionics specialist employed at Honeywell with 10+ years of experience.

In the interviews, either the graduates were aeronautical graduates or software programmers. But none had the combinational skills that the avionics industry needs.

So the seeds of the lecture series and industrial tour were sowed.

The avionics and lecture series is an attempt to reconnect avionics in industry to the avionics students and graduates of aesi.

There is more to avionics than DO-178 etc.

So if you are an avionics graduate or are doing section b in avionics stream, don't miss this opportunity. The opportunity to hear from an avionics expert an what the avionics industry wants.

Register now by filling the form at this location.

http://my-aesi.blogspot.in/2014/04/avionics-lecture-and-industrial-tour-by.html

Sunday, April 20, 2014

Avionics Lecture and Industrial tour by AeSIAA

The AeSI Alumni Association is committed to the development of programs designed to bring students and alumni together. Through meaningful interaction between students and alumni, we can inspire learning. With this objective in mind, a dedicated industrial tour is being organized for AVIONICS students to facilitate a better awareness in our students and engineers by reaching them and this require a step-by-step approach.

Today, aviation is playing a vital role in our daily life, and there is a need to think more on the environment, airspace, fuel efficient with safety. There are lots of challenges in the field of Aerospace by considering such factors. The purpose of this talk cum industrial visit is to share some of the best things that we have done so far to save our environment, fly economically without compromising safety aspects,be efficient etc, and we have done our job by making best use of engineering.

The main agenda is as follows.

1. Discussion on the role of Aerospace and Aviation Industry.
2. Industry visit.
3. Training to understand some of the Aircraft cockpit instruments viz. Autopilot, Auto throttle, FMS etc, and most important is ATC rules i.e. flight operation.

If you have trouble viewing or submitting this form, you can fill it out online:
https://docs.google.com/forms/d/1fWHyu9HgZbHRQ8j7UR8gQVdYxG-cZT_B_unNII-i05I/viewform?usp=mail_form_link

Avionics Lecture and Industrial tour by AeSIAA

The AeSI Alumni Association is committed to the development of programs designed to bring students and alumni together. Through meaningful interaction between students and alumni, we can inspire learning. With this objective in mind, a dedicated industrial tour is being organized for AVIONICS students to facilitate a better awareness in our students and engineers by reaching them and this require a step-by-step approach.

Today, aviation is playing a vital role in our daily life, and there is a need to think more on the environment, airspace, fuel efficient with safety. There are lots of challenges in the field of Aerospace by considering such factors. The purpose of this talk cum industrial visit is to share some of the best things that we have done so far to save our environment, fly economically without compromising safety aspects,be efficient etc, and we have done our job by making best use of engineering.

The main agenda is as follows.

1. Discussion on the role of Aerospace and Aviation Industry.
2. Industry visit.
3. Training to understand some of the Aircraft cockpit instruments viz. Autopilot, Auto throttle, FMS etc, and most important is ATC rules i.e. flight operation.

The above areas will be addressed by taking up a series of invited lectures in this area followed by industrial visit. The first talk in this series is being delivered by Shri Rajesh Chaubey, Technology Specialist, Honeywell Technology Solutions.

If you are interested in taking advantage of this opportunity, contact us at the information provided below.

>Registration and submission of report of the Industrial visit are must.
>A follow up session will be held separately for deserving candidates seeking In-Plant Training/Job etc.
>Confirmation to registered participants will be sent latest by/on 30th April
>There is no registration fee for “AeSIAA-Industrial Tour” and last date of registration is 29th Apr 2014.
>This event is exclusively for AMeSI Students & AeSI alumni (Unemployed) only.

>ONLY a batch of 15 will be taken for Industrial visit however lectures are open to all. >Priority to Industrial visit to members of AeSIAA.

Please fill the online registration form to register for the lectures and the industrial tour.


Tuesday, March 18, 2014

Send Resumes For Planned Placement Drive

Hi All

As a social responsibility towards employment, AeSI Bangalore Branch in association with Society of Indian Aerospace Technologies and Industries (SIATI) , Aeromag Asia &  AeSI - Alumni Association is planning to organize a placement drive at CIT campus for Aerospace / Aviation sciences & Allied engineering branch students from AeSI Associate Membership Examination as well as from other AICTE approved institutions.


Inline with the AeSIAA's mission to promote welfare of AeSI students and graduates, AeSI Alumni Association invites resumes from all recent graduates of AeSI for short listing for this drive,


Please send your resumes to secretary.aesiaa@gmail.com with the following as the subject line.


Subject: [Stream][Overall Percentage][Year of Passing][Mobile no]


For example:

Subject: [Avionics][73%][2013][97123456]


Please send resume in doc Format.


Date : To Be Announced

Venue : Cambridge Institute of Technology , K.R. PURAM, BANGALORE,KARNATAKA 560036



Please Note: 

  1. Any email without the correct subject and Resume will not be part of the drive.
  2. Last date for sending the resume is 22nd March 2014 (Saturday)


Friday, January 31, 2014

Job Opening : Avionics Freshers !

Important Notification

If you're interested to work in the area of Flight Mechanics and HIL Testing then perhaps you may like to send your resume to Himalya Bansal at himalya.india@gmail.com.

Only AeSI Avionics Engineering Graduates with 60% marks or above.
Freshers are welcome.
Basic knowledge of MATLAB is essential. 
Last Date : February 02, 2013

Kindly do not send your resumes without 'Cover Note' and please specify 'Why are you interested to work in the area of Flight Mechanics?' while sending your resume.

All the best !
Team - My AeSI

Wednesday, November 20, 2013

What you should do in Section-B (Avionics) which you don’t know.

I came across many situations where AeSI recent graduates have to walk together with the engineering graduates of Electronics background in order to get selected in an interview. I know it is damn difficult but not impossible. The fact remains the same that many Avionics engineers are working as an Embedded Software/Hardware engineer. Henceforth it is very much essential to learn the basics of various safety, security and mission critical standards, software and hardware. Unfortunately it is not a module of your Section-B syllabus however by spending few hours a week; one can certainly assure that he gets a job after completing his engineering degree.

Case study: I have recently joined a company where it is very much essential to know the basics of reliability, availability, maintainability and safety. I certainly wasn’t aware about these terminologies hence I have started taking advantage of social media. I have downloaded certain videos from YouTube on reliability basics and then I have downloaded couple of white papers about various methods of reliability predictions. No doubt, I wasn’t able to grab all things in one time but I certainly have learned new things. One should always remember that learning is an ongoing process.
I strongly recommend you to learn the basics of following modules before you start job hunting:
-     
  1. Requirements Engineering: Learn the basics of requirements engineering.
  2. Design, Modeling and Simulation basics: You can learn many things at Mathworks website.
  3. You have C, C++ as a module in Microprocessor & Software Engineering subject of Section-A. However getting is the right answer can never make you a good programmer. It is very much essential that you should know the art of writing software code. MISRA – C, C++ can help you in doing the same. There are various technical FAQ and discussion threads available on official website of MISRA.
  4. Basics of Software Testing. Specially modules like static analysis, unit testing, code coverage.
  5. Basics of In Circuit Emulators and hardware debuggers.
  6. Reliability Prediction standards such as MIL-HDBK-217, NPRD 95, etc.  How organizations predict reliability and do impact analysis. Google modules like Fault Tree Analysis, Reliability Block Diagrams, Failure Mode Effect Analysis, etc.
  7. Hardware Debuggers
  8. Basics of compilers, IDE, RTOS, middleware, etc.
I know that being a student, it is very difficult to learn these many things but if you know at least the basics so I am sure that nobody can stop you in getting a good job.

Start asking “W” questions like
What is it?
Why is it used?
What are the methods?
Which companies are the best in each area?
How the knowledge of it can help me in my career?
& many more. 

Happy Learning! Please let us know if you require any additional support or information from our side. You may mail your queries as a comment below. 

Cheers!

Tuesday, August 27, 2013

An initiative of AeSI - BB : Independent Verification and Validation of Aerospace Control and Avionics System



Aeronautical Society of India, Bangalore Branch in association with Aeronautical Development Establishment (ADE), Aeronautical Development Agency (ADA), Aeronautics Research and Development Board (AR&DB) and LDRA is organising a two day interactive workshop on the Independent Verification and Validation of Aerospace Control and Avionics System on September 20–21, 2013 at Sameeksha Hall, ADE, Bangalore.


Areas of Discussion:

·         IV&V of flight control system of LCA using Iron Bird rig
·         IV&V of OFP software of the FCS of LCA including compiler validation
·         Design, development and utilization of Mini Bird rig for the validation of LCA FCS hardware and software
·         HILS of UAVs, Lakshya, Nirbhay – rigs used and the experience gained over the years
·         RTS in the IV&V of LCA CLAW
·         IV&V of AEW&C system software
·         IV&V of avionics systems of manned aircraft
·         IV&V of missile avionics & controls
·         IV&V of space vehicle avionics and controls
·         V&V to Certification
·         Requirement Engineering to V&V
·         Half day visit to Iron Bird/Mini Bird, RTS facilities

Please note that the last day to register is August 30, 2013. For more details and to register for this workshop, please visit http://ldra.com/workshop 

I personally feel it's a good platform for Avionics students, engineers and leads to learn from industry experts. Speakers are from ADE, ADA, RCI Hyderabad, NAL, LDRA, VSSC and DRDO. 

Cheers !

Friday, March 22, 2013

Send a Resume But Don't Insult.


I am sure, 15 year ago, Sam was a smart boy.

He knew that he won't get the bat he wants to buy if he just blurts out the demand when his dad, tired from work, comes home. He knew he had to be patient, observe and judge his dad's mood. He had to be obedient and make sure he is on his best behaviour before the demand is blurted out to dad.

He was smart to engage his mother and persude her to be on her side, to push for him. And he knew if he played his timing right, dad will buy the bat for him.

Now 15 years hence, where is this common sense gone? When someone informs you that there is a requirement for a graduate of avionics, you don't think and just shoot that resume sitting on the desktop without a thought.

Many a resumes go unnoticed and uncalled for just because of this unprofessional approach. What message does this convey? Technically competent guy but such utter lack of professionalism in sending resume.

If you are referred to send a resume, at least think of the person who is receiving it, to forward to his or her HR department. Can your resume can be forwarded just as you presented? Does it has the relevance to match the requirement, and the format and content to stand out?

If this were happening 5 years back, when internet was expensive and uncommon, and only resume writing advice was available in some obscure magazine article or some books, then that was a different matter. But now when the world is connected, a resume is just a google search away and you have the means to research the company you are applying for, a thoughtless resume is no longer acceptable. Its an insult.

So my advice to Sam, Please bring back your smartness. You knew how to get that bat from your dad. Apply the same common sense to get that interview call.

Here's some advice on crafting a resume or Sending a proper resume. If you are graduating in near future, please read this few articles. They will serve you well.

Thursday, February 21, 2013

What You DON’T Know Can Hurt You: What you NEED to know about MISRA C:2012

Dear all,

Greetings for the day !!!!

If you’re developing safety-critical applications, you can’t afford to take chances. But commercial pressures don’t go away just because you’re diligent. The latest version of the MISRA standard lets you take advantage of more C features while helping you mitigate risk for safety-critical automotive, medical, industrial or mil/aero applications.
 
Anyone developing software with the potential to put lives at risk has an obligation to take every reasonable step to ensure that the work is sound. Adhering to standards is one key step in that process, and MISRA is the internationally recognised foundation for best coding practises. But features of the language that are designed to increase application performance, developer productivity and implementation flexibility are often just the features that the standard disallows. MISRA C:2012 changes the game.
 
Many of the Aerospace companies use MISRA Coding Guidlines and Henceforth I'm sure Avionics students would like to know more about new standard’s release.  
 
Following immediately on the heels of the new standard’s release, Chris Tapp, chairman of the MISRA C++ Committee, member of the MISRA C Working Group and one of the authors of MISRA C:2012, will tell you what you need to know:
 
What will you learn?


  • How the new standard can help you make better decisions about the use of popular programming language features
  • How MISRA C:2012 provides backwards compatibility to protect legacy code
  • How the introduction of “decidable and undecideable” proscriptive rules will help focus your test efforts
  • The effect of introducing support for C99 on the MISRA C:2012 standard


  • Date : February 26, 2013
    Registration Link for Live Broadcast : http://goo.gl/SFgTA

    Note : If live broadcast time does not suit your schedule - register anyway and you will be notified once the archived session becomes available (about 48 hours after the live webinar).

    At last, Best Wishes for all who are waiting for the result of Associate Membership Examination of The Aeronautical Society of India.

    Cheers !!!!

    Sunday, December 30, 2012

    Life without Aim !!!!

    Day 1 :
    Someone from an University called me and asked guidance about Avionics. He said that he is doing research from last 7-8 years but he is not able to connect with right person who can help him in converting his vision into reality.

    He told me that he meet with engineers of various DRDO laboratories but didn't get any response. Add on to it he also told me that he looks forward to connect with right person in the industry who can support his project and give direction in a positive way.

    Day 2:
    After my AeSI Alumni Association's meeting, I meet him. We ordered fresh juice with sandwich and our discussion started. I was very excited to meet this person and to know more about his research. Trust me he was very energetic and I was able to see a "Can Do!" spirit in his face.

    BUT suddenly my expectations turned into ashes.

    Based on his projects, I found that he is very much interested in Aircraft Navigation, Instruments and related Avionics. I asked him if you love Avionics and want to make your career in Avionics so why are you doing internship in CFD ?

    He replied that my college told me to do the same.

    I don't want to name such universities but yes, I know 2-3 universities in North India where I have noticed similar education pattern. Irrespective of the area of interest, students join some softwares and after finishing the course, they realized that it's nothing to do with my area of interest.

    Conclusion : Let's walk together and help the industry. Whenever you see something wrong or fraud anywhere, Stand and raise your voice. Be United !!! 

    God bless all

    Wednesday, December 05, 2012

    Six Techniques for DO-178C Compliance !!!

    Good Morning !!!

    Kind Attn : Avionics Students, Avionics Graduates.

    Right after AeSI's exams, you'll be giving multiple interviews in various companies and my knowledge says that most of the companies ask few questions related to DO-178B/C, Software Testing and Programming Language - C.

    Next month I'll share few online ways to practice for the technical round with you. Meanwhile if you are interested to learn about the techniques for DO-178C Compliance so you can register yourself at (Click Here) and watch the webinar today at 2:30 PM (India).

    In case if you miss this opportunity, so you can also watch it later at (Click Here).

    Reference:
    Few months back one of my friend has given an interview for the position Software Trainee Engineer (Contract) at Confidential. I'm sharing "Skills Required" for such job profiles.

    Email Subject : Written Test for Software Trainee Engineer at Confidential

    Skills Required:
    1. Good programming concepts in C language.
    2. Good communication skills, innovative thinking & good learning ability.
    3. Good to have skills like LDRA & Unit Testing concepts and ADA 83/95.

    Cheers !
     

    Wednesday, October 17, 2012

    Static Analysis | Dynamic Analysis | Unit Testing | Code Analysis Discussion

    Since I've joined LDRA Technologies Pvt. Ltd as Technical Marketing Assistant hence I recieved few queries like :
    What LDRA does ? and what its focus is ?
    What is the role of LDRA tool suite ?
    How these tools can help you in achieving zero defect software ?
    and so on ....
    Henceforth the answer is here ....

    Whenever a company develops any software application on which people’s lives depend than it becomes very necessary for the developers to achieve zero-defect software. In order to achieve it, we use static analysis, dynamic analysis, unit testing etc.


    Readers of this post might be interested in knowing what do I mean by static analysis, dynamic analysis and related terminologies. I'm sure by reading below linked articles you'll be able to understand the meaning of such terminologies.
    @ AeSI Students : Even if you look at Job Description of recent recruitments, so you'll find few terms like basic knowledge of DO-178B including Level A, knowledge/experience on LDRA tools etc. Henceforth I strongly recommend below mentioned articles to be read by all Avionics students and recent graduates.
    If you would like more information concerning the LDRA tool suite else if you want to know how such tools can perform static and dynamic analysis or unit testing than please take a moment to complete the following form. (Click Here)

    All the best !

    Friday, October 12, 2012

    Why should I learn programming language 'C' ?


    A : Hey, What are you doing in Bangalore ?
    B : I’m working as a Software Engineer.
    A :  Is it so ?
    B :  Yes, I’m working in ABC Group.
    A :  But, You’ve only learned basics of embedded. Isn’t it?
    B : Yes, I’ve worked on AVR platform and on Atmel’s Atmega 16 micro controller.
    A : Have you made any project as well ?
    B : Yes, I’ve made projects like line following robot, traffic light and to display various patterns on LCD.
    A : Don’t make me fool, You’ve made a project of traffic lights so How can you work on any aircraft related project? How will you relate traffic lights and aircraft?
    B : Wait, Let me explain !
    A : Sure, & also explain me that why should I learn programming language ‘C’ ?

    Here are the answers/explanation of the questions asked by A.

    1. Have you observed a green and red color light at the tip of the wing and which keeps on blinking?
    2. Have you observed the green and red color light on the belly of helicopter?
    3. Have you noticed that once pilot achieves decision height so landing light automatically turns on?

    Let me tell you that these lights are used as an indication and warning light and play a vital role in  landing at zero visibility. They also help in decision making like it helps a pilot to understand the direction of another aircraft. Click on the below mentioned links to understand the importance of such external lights. Approximately 99% of such lights are controlled using an embedded system.
    Basics will always remain the basics irrespective of the fact that whether we are working on a F1 car or a F16 fighter aircraft. Have a look on major electronic device like a calculator,  microwave, washing machines, digital camera, display unit on AC buses, ATM machines and so on… They all are getting smarter day by day. This smartness comes from a microprocessor, an operating system and a program embedded in these devices. You’ll be surprised to know that these programs are written in programming language ‘C’.

    Even though now a days we have automated tools to do programming and to help programmers to make an error free & high quality program so that it can be certified at the most rigorous levels yet if you don’t know the basics of programming so you can’t work on automatic tools as well. Developers of sophisticated applications such as those utilized in avionics, high-speed trains, nuclear reactors, automobiles and medical devices use such automated tools for automatic software development and to pinpoint programming errors.
    Take any example starting from the automation of aircraft gate to critical navigation & auto pilot system. Everywhere we are using embedded system and thus it’s very necessary for an Avionics student to be familiar with programming concepts.

    An open advice to all avionics students.
    - Learn C, C++, Matlab
    - Work on at least one embedded platform if not ARM or PIC so at least AVR.     



    Search This Blog