Showing posts sorted by date for query hypermesh. Sort by relevance Show all posts
Showing posts sorted by date for query hypermesh. Sort by relevance Show all posts

Thursday, July 17, 2014

Fwd: Urgent Requirement of 2-5 year exp. in Hypermesh

Hi All,

For your information and action if applicable


Cheers
Sukhbinder

Sent from my iPhone

Begin forwarded message:

From: abhishak saini <abhishak.saini@beanalytic.com>
Date: July 17, 2014, 11:31:30 AM GMT+05:30
To: Rakesh Kumar <aerorakesh@gmail.com>, Rakesh Kumar <secretary.aesiaa@gmail.com>, sukhbinder.singh@gmail.com, gie.endeavour@yahoo.com
Subject: Urgent Requirement of 2-5 year exp. in Hypermesh


Dear Sir/ Madam,

We have urgent opening for Hypermesh (meshing tool). We are looking for 2-5 years experience candidates who have good hand on experience on hypermesh tool. Knowledge of any solver will be an advantage.

Please Send the resume to  anilkr.ammina@beanalytic.com  and  suresh.patri@beanalytic.com . 

Contact us : 080-65470039 

Please inform others.

Best Regards,

Abhishek Saini
Reliability Engineer
_____________________________________________________________________________________________

                                
BE Analytic Solutions, 77, SRR Layout, Mahadevapura, Bangalore 560016, India 
Desk: 080-65470039 / Mob: +91-8792890197,8553883928 / Fax: +91-78385 93998 / www.beanalytic.com


Thursday, April 04, 2013

Stress Analyst Requirements and 3 point checklist.

If you match this requirements, send your resumes to the following email. sukhbinder.singh+myaesi@gmail.com


Before you send your resume, please run through this 3 point checklist.
1. Is your resume in presentable form. No modification needed what so ever.
2. Is your profile matching with the requirement?
3. Are you serious about this job?

If you have responded no to any of this question, your CV is already rejected, if not, shoot your CV now.




Experience       :  3yrs – 10yrs
Qualification    :  B.E / M.E in Mechanical/Aerospace Engineering
Location           :  Bangalore
Position            :  Stress Analyst
Job Code           :  HC/JC/3035/12
 
Job Description :
 
-       Experience in aerospace industry, with good structural stress analysis experience, preferably with airframe structures
-       Good awareness on Airframe/ Nacelle components and programs including an understanding of basic load conditions and load paths.
-       Performs structural analysis of a complex nature using conventional hand calculation and/ or computational analysis on Metallics and/ or Composites
-       Strong application of engineering principles and theories in structural analysis
-       Experience/ Exposure to composites (Laminates and Sandwich Panels)
-       Very good knowledge of NASTRAN/PATRAN and Hypermesh
-       Working knowledge of Catia V5
-       Highly proficient in MS Office Tools
-       Good analytical and problem-solving skills
-       Effective communication and interpersonal skills



Friday, July 16, 2010

Shun shortcuts while learning CAE softwares

When learning a cad software like catia or ug or learning an analysis
software like nastran, hypermesh, icem, fluent etc, shun shortcuts.

This is the simple but most effective way to learn that specific
software.

Shun keyborad shortcuts. Don't use toolbars. Intead of choosing the
plot contour option from the toolbar, hunt them on the file menu.
Instead of zooming with one keyboard command, hunt the relevant
command in the menus!

Why this helps in learning that software better?

Instead of going for the easiest route, you dig into the file menus.
This exposes you to many other command. You absorb other commands even
if you are not using them regularly.

Menu commands are arranged in a specific manner and accessing those
regularly make you understand which commands form a particular group.

Using menu commands make you more robust. They will always be same in
any system you work. Users can arrange toolbars easily but specific
commands in the menu system remain the same, so the habit of using
menu commands will come handy if you switch systems.


Find more info on mastering specific CAE tools by searching the blog
via this link http://my-aesi.blogspot.com/search?q=tools

Wednesday, June 16, 2010

11 softwares in 6 months !!

A few weeks back I had an email exchange with a recent graduate of
AeSI. In the discussion he spelled out this plan.


I have decided to take a six month course from CENTRAL INSTITUTE OF
TOOL DESIGN HYDERABAD that is giving eleven softwares as catia, ansys,
nastran, proE, ug, autocad, hypermesh, solidworks, autodesk inventor,
mastercam, delcam and nc-cnc programming for Rs.40,000/

I asked so which tool are you planning to learn. He said they will
teach him all!! I was speechless.

11 softwares in 6 months!!

If I were him, I will not go for this. Instead I would concentrated on
one and two softwares!!

It's like cooking lunch on 11 gas burners, and alternating every few
minutes to a different one until all are touched.

It's like having 11 balls in a soccer match!! This is madness.

Are you doing anything like this? Then stop. And reassess, something
is wrong there!!

About 400+ people have downloaded the free ebook on AeSI? Are you one
of them? If not download'After AeSI- career guide to AeSI' from
MyAeSI now!

Sunday, June 13, 2010

Are you aiming for training or job after AeSI?

Whatever catia or ansys or hypermesh course you do? How many hours you
dedicate to this softwares? Whatever money you spend to learn them?

True learning will only come when these skills are put in practise.
Training in an institute might teach you the tool. But not ingrain the
required skills.


At work, where delivery is the only performance measure, your skills
will get the appropriate environment to get cooked.

My skills of programming and CAD were rustic when I graduated from
AeSI, but the work in NAL, having the opportunity to work on real time
projects, my abilities fine tuned!! My programming logic improved, and
I began cad modelling complex centrifugal compressor assemblies!!

So once you are nearning end of your AeSI, aim to join a training in
an organisation or job as soon as possible, so that you can sharpen
your skills!!

Find more on getting training after aesi by hitting the following link http://my-aesi.blogspot.com/search?q=training

Have you downloaded the free ebook on AeSI already? Download 'After
AeSI- career guide to AeSI' from MyAeSI now!

Saturday, May 22, 2010

CAE packages widely used in the aerospace industry!!

Here's another gem of a post from ouraesi from Mr. Bhushan!! In this
post he highlights many CAE packages being used in the industry.

As he rightly said, choose ONE of them and let it jump start your
career.

With any delay, here's the complete text of the email

"

Hi Guys,

In last couple of years there has been a lot of opportunities for AESI
fellows. Thanks to many; who still extend their help generously.

It's often become complicated to decide on future plans after section
B. Not all but few prefer higer studies after graduation but still
there are many who struggle alot to finalize their goal.

Apart from higher studies, one can seek knowledge in various analysis
packages and move ahead as a professional analyst. But make sure you
are on a right track while selecting these packages.

Please find following packages which are widely used in industry for
an analysis.

Structure - Ansys Mechanical, LS- Dyna, Nastran, Patran,
Abaqus
Fluid Dynamics - CFX, Fluent, Star-CD
Hydrodynamics - AQWA
Meshing - HyperMesh, Ansys Meshing tools, Tgrid
Robotics - DELMIA Robotics (Dassault system)
Electromagnetic - Ansoft products (Maxwell, Q3D, HFSS)
Manufacturing - DelCam

Modeling - There are many packages like CATIA, PRO-E,
Solid works, Rhino Ceros, Ideas, UniGraphics

This is a partial list of widely used packages across different
countries. You can find many packages in industry. Please, evaluate
them before you choose one for your future area of interest.

Best Regards,
Bhushan

"

Thank you Mr. Bhushan! Contribution from members like you extend the
vision that ouraesi group was formed for 9 years ago!!


Find more gem of ouraesi articles by searching http://my-aesi.blogspot.com/search?q=ouraesi

Wednesday, May 12, 2010

Seek problems

Learning catia, learning solidworks, learning hypermesh, learning
ansys or learning anything, seek problems once the basic tutorials are
complete!!

Solving problem is the best and fastest way to learn and become
confident in any software tool.

Faced with a problem, the mind is extra receptive, more creative and
wide open to try out things.

Whatever stage you might be in now, from training to learning on your
own. Once you have gone through the basic tutorials. Seek real
problems. Use the tools to solve real stuff.

Design catia models of your own formula one car, model a pressure
cooker and mesh it. Do a CFD analysis of your table fan. This out of
the box projects will get to you the edge of what you know. They will
present opportunities to explore the tool.

This is where the real learning will begin. So take this to heart, if
you truly want to master a tool, seek problems!!


Find other tool learning tips by clicking http://my-aesi.blogspot.com/search?q=tools

Thursday, April 15, 2010

What tools to learn in avionics stream?

A recent mail from the reader of this blog has this question.

"I am in section B and have avionics branch, so what extra course i
can do which is helpful for my career!"

I guess I talk about catia, solidworks, ansys, ungraphics, fluent,
hypermesh etc but I rarly talk about anything realated to this stream
that many in AeSI take.

Before I lay my two thoughts on this subject here, I would like you to
point you to find the old articles in this blog that might help you.

You can find them by clicking this link http://my-aesi.blogspot.com/search?q=avionics


Well that being said, I would like to add that first and foremost take
up c language and start learning it from now starting today. Don't
worry about when and where just resolve that this is one language you
want to master while still pursuing this stream.

And second thing, search for some good blogs or websites that talks
about this subject. Subscribe to them. Read them everyday. You might
not understand everything written in that. That's ok. Just be a part
of the team. Join avionics groups in yahoo, google and linkedin.

Do this two things consistently and do it with a sense of mastering
them, you will require no additional advice from anyone to have a
great start to your career!!

Hope this helps and don't forget to tell me how it goes.

And better still start a blog about your adventures in this stream!! I
would love to hear your experiences.

Good luck!!

Find more avionics related posts
http://my-aesi.blogspot.com/search?q=avionics

Tuesday, March 30, 2010

One powerful Lesson from learning solidworks for learning your fav CAE tool

Learning any CAE software like catia, UG, hypermesh, solidworks, ansys
etc is lot like learning a foreign language. The more you practice it
in real-life situations, the better you become at it.

So what are you doing about it?

What is your strategy of learning your favourite cae program?

I will illustrate mine. In NAL I became fasinated with solidworks. It
was the primary cad tool in my lab and glancing at the cad operators
from my desk, I was always drawn to the fasinating tool.

So first thing I did was I asked for a demo from the cad folks and
asked them to point me to the tutorials. Once I had a look at those
tutorials and I began practising them. I began to venture out.

In my quest to learn the software, this tutorials were roads and
tracks laid down for me. As long I travelled on them I was doing good
and feeling confident but I was not confident to take a new design. So
along the way I began deviating from my path, I began exploring the
sideways. I delayed replaying the tutorials and began making household
utentils. Cups, plates stoves, replaced the bar coils and nuts and
bolts of the tutorials.

To cut the story short, my decision to do real life articles and stuff
enabled me to learn the software much more quickly.


So the whole point of this post is this. Don't be just a fan of the
tutorials. Walk on them, they are generally the best source of
learning but don't always keep to the roads and venture out to the
side walks and explore.

Keep aside the tutorials and try things from your world. Create cad
model of your study table, analyze the load of your bike etc.


Its truly like learning a new language, unless you practise it out
with the world, you won't be learning it enough!!

Monday, March 22, 2010

Consistency

A couple of days back I read the following text somewhere and I
collected it as text file for my quotes log that I am keeping.

It has a great point and if we can understand this we can greatly
improve our performance in study and job.

"The key to getting better is consistency of effort…not consistency
of results. Consistency of effort leads to growth which leads to
consistency of results."

Yes be consistent in your efforts. Not consistent in your results.
That will follow. But aim to be consistent in efforts.

Consistent in studying for two hours per day, consistent in doing
catia, ansys tutorial one hour per day, consistent in learning fortran
or VBA, one hour per day.


This is the consistency of effort. Putting in the time. Tearing
yourself from an IPL match to put in that agreed hour. Gluing yourself
to the hypermesh tool for that extra out of work time.


Endevour to be consistent in your efforts.

Thursday, March 11, 2010

How racing against time can help you learn catia better?

Racing again time is the most effective technique that you can apply
to your study or in learning a new software tool like catia, ansys,
hypermesh etc or computer language.

Constraining the limited amount of time you can work, you create a
positive pressure on your brain to learn and do the same task quickly.

It's like compressor of a gas turbine. The higher the pressure ratio
the higher will be the thrust or output. So constraining, limiting and
putting a chain around the task pushes your mind to a zone where it's
more creative and it does accomplish much more.

It's far far better to study for one hour with single minded focus
than chipping on the the book for the whole day hardly taking anything
in. It's far better to crack two tutorials of a software of Catia or
ansys in an hour than tinkering with the software for the whole day.
It's far better to practice ten input output related simple programs
than thinking whole day about your next big program.

The point is put time constraint in your work, study and everything
you do and you will see that you are doing better.

And what more you are gaining few extra hours in a day.

This blog post was also an exercise in the power of constraint.

Find more tool and study related hacks by clicking the following link http://my-aesi.blogspot.com/search?q=advice

Tuesday, February 16, 2010

Show your benefits not features

Now what do you mean by this? What does this say? What are your features and what are your benefits?

In your resume, don't cram it with all the skills that you have? Be relevant. Don't state all your experiences in one resume. Be relevant.

Skills can be HTML, fortran, catia, ansys, hypermesh etc. Experience can be in meshing, gas turbine performance or compressor design. Depending on the job requirement , your skills, your project and your experience can become a benefit or just remain a feature.

The higher the benefit you will show greater is your chance to get that job. So after requirement study, always do a benefit vs. feature analysis of your resume and shift the balance as required when you begin updating your resume.


Jobs don't come on features, they sprinkle from benefits that this features provides to the employer.

You won't get a job by convincing them that you need the job, you get it by making them realize that they need you!!

Good luck!!

This is a post in the series update your resume. Find other posts related to this series by clicking update your resume

Monday, February 08, 2010

Soak yourself for remarkable career!!

Success in any field or career is possible only if you soak yourself fully in that career or filed.

You can bath properly in a pool only if you are willing to immerse yourself fully in that pool.

Total immersion is prerequisite to be good in what you do. From catia to hypermesh, from Fortran to fluent CFD, soak yourself in the knowledge centres of your chosen tool.

For being a good Fortran user, I need to not only code in it but stay in touch with different standards, to be remarkable in this a chosen tool, I not only know what is needed for my current job but explore topics far outside my work zone.

It's just not possible to be just good now a days, you have to be remarkable for that you have to immerse yourself fully in your chosen choice.

Read more on career and how to succeed by clicking http://my-aesi.blogspot.com/search/label/advice

Read more

 

Wednesday, January 20, 2010

Walk-in at TCS Bangalore on 23rd January 2010 (Saturday)

From the AeSIAA group.

Dear members,
There is walkin in TCS for all Domains.
CAE- Hypermesh is also one of them, in which most of us are working.
But I don't know how-long Companies will not consider AeSI like degrees.
As in eligibility criteria its mention.

As per my knowledge IIT Madras Mtech+Aesi guys are working in TCS, I request to them please insist to H.R for AeSI guys ELEGIBILITY.






I totally agree when guys only with AeSI degree can work in Rolls-Royce and GE then why not in TCS or any other company.

I think this is not the failure of the company or AeSI but failure of AeSI folks who come out of aesi. They should promote themselves. They know they are good, then why feel shame.

Go ahead make people aware of your clan, about your degree.  

 

Thursday, October 01, 2009

12 CAE interview questions to prepare for

Arvind Pandey is working on CAE software in NAL and he has send me 12
questions that he was asked in his cae interview. He wants them to be
shared with you all.

So here they are.

1. What is hypermesh?
2. Why it is called hyper? Why not anything else?
3. Why meshing is needed?
4. What type of elements are created by meshing?
5. What is dof?
6. What is degree of freedom of a plate element?
7. What is post processing? Why it is needed?
8. What is IGES?
9. What steps will you follow to do stress analysis if we give you an
iges file?
10. How to apply boundry condition and how do decide which boundary
conditions you will apply?
11. What are the common material properties that you can apply on a
model?
12. What is youngs modulus and density of steel and aluminium?

Thanks Arvind!! Keep up the good work.

More CAE/CAD related posts at http://my-aesi.blogspot.com/search?q=CAE


Receive posts in email or google reader http://feeds.feedburner.com/myaesi

Friday, August 21, 2009

Secret of being a successful designer, analyst or programmer

Learn by doing not collecting.

This is the only secret of any successful programmer, designer or
analyst. They all learnt by doing.

Just collecting tutorials, googling catia hypermesh models, torrenting
vedio tutorials won't move you anywhere. Only thing that will help is
doing. Creating models in catia, meshing models in hypermesh, and
analysis in ansys or nastran will teach you more than reading heaps of
tuturial material.

So ask yourself are you doing or collecting?

The sooner you begin doing the faster you will get to master the tool.

Liked this post, please consider subscribing to my-aesi blog by
visiting http://feeds.feedburner.com/myaesi

Related catia or computer aided engineering stuff can be found by
clicking on the following link

http://my-aesi.blogspot.com/search?q=CAE

Sunday, July 05, 2009

Easy stuff or difficult stuff!!

Both of them are important, both have their own value, both can teach
you valuable lessons.

Doing easy stuff gives you the motivation, energy and spring you to
bounce back. While doing hard stuff enables you to learn new things,
helps you keep active and help you to challenge yourself.

So always mix hard and soft stuff. Have hard and easy stuff in your
life. A healthy dose of both is essential. They will increase and
perpetuate your knowledge. So how do you apply this in your studies,
training, and job.

In studies always make sure you are studying something new everyday
and revising something that has been studied. Revising is easy just
rehearse what you have learnt in the previous day. This mixes the
whole routine and helps you get more out of your study time.

In training, the same core principle applies, add new skill and
explore the already known skills. If its catia, then pracitise the
same old loft but find out about the cloud point import. Similarly in
hypermesh do Old and new stuff together. This will help you get the
best of the software. And learning will be much more rounded.

In job don't remain stagnant, stir things up weekly, make a
presentaion, develop a company specific tool and basically take
initiative at new things while contributimg towards the daily work
assignment

So mixing hard and soft has advantages and if applied inteligently can
earn you successful degree, fruitful training and a sparkling career.


For reading more tips on career do click the following links.

Http://my-aesi.blogspot.com/search/label/advice

Http://my-aesi.blogspot.com/search?q=career

Http://my-aesi.blogspot.com/search?q=catia

Http://my-aesi.blogspot.com/search?q=training

Friday, July 03, 2009

Get the Game Playable as Fast As Possible

Get  the game playable as fast as possible.. this is the exact thing that I want to tell anyone who is interested in learning a design or analysis software. Reading and learning shouldn't be the bulk of it. You have to make sure you  get to the basic design stage as fast as you can.

Begin delivering.
When I began learning solid works, I was playing by making cubes, glass, bowl etc but as soon as I got the sense of the things. I went straight to my design team member and asked him to give me a real life data for me to play around.


He was generous and he gave the coordinates of a centrifugal compressor he cad modelled. And I began cad modelling a real life compressor model. Had lot of hiccups on the way but was finally pleased with what I made. On hindsight, I know that my approach of getting to play with solid works as fast as possible was the trick that propelled me latter to be a part of the design team of

so whats the take away in all this..
Set a minimum amount of time that you will just do the exploration. Make this commitment before you begin on a software. Once you have fixed a time. then half it and carry on with this constrained target. Once you complete the knowing the software. Jump into to play with some real thing. if its catia, get your hands dirty of some real project, if its hypermesh, get a real life model to mesh.


This is the best way to accelerate your CAE tool learning. Nothing will teach you better than working on some real problem. No tutorial will stretch you that a real problem at hand can. So if you are sitting to learning a new CAD tool like catia, solid works, ANSYS or nastran, just remember to get the software playable as fast as possible.

Wednesday, April 22, 2009

4 function key excel shortcuts that help me in my work

Whatever you use, be it catia, solidworks, UG, NASTRAN,ANSYS ,PATRAN, HYPERMESH or any other CAE software, excel is one of the software tool that always be the one that will be come to you. Maybe for preparing some graphs or presenting the data from the analysis. For my work excel is tool that i use everyday ion my office. so today i would like to share some of 4 function key shortcuts of excel that has made my life easy.

F2 the second most used key for me. If you want to edit a cell value. This is the key to use. Instead of double clicking F2 comes handy to edit those long formulae's.

F7  spell checker. My spellings are bad, even in spread sheet I manage to get many spelling mistakes, so one click on F7 I the best that I can get.

F4 is the most versatile function key of excel. I use it the most. It repeats your last action. So this can be used for many task. Since there no fix action. so its programmable to use any action. If I have to delete a row. repeatedly. I select the row and then right click on it and choose delete. after than any row I want to delete I just choose that row and press F4. similarly if I have to clear lot of stuff from one sheet. I use the F4 key instead of right click and choosing clear contents multiple times.

F11. Most of the time my work in excel involves making graphs of the data and f11 comes to the rescue. just select the data and press F11. You will have the default graph plotted. Since I want a particular type of graph so I always make a default graph and use it every time I need a graph.

Do you have any shortcut keys then please do share it with me.

Tuesday, February 24, 2009

The Impact Comes From The Craftsman,

Just like every powerful tool, the impact comes from the craftsman, not the tool. -Seth Godin

Just read  this blog entry from marketing guru Seth Godin and loved this line. and its very true. True for all the things that I advocate in this blog. Catia, Solidworks, Ansys, Nastran, Unigraphics, Hypermesh, Fluent, ICEM, Isight, Gambit,Patran etc are powerful tools but that power doesn't come by itself, it comes from the users who uses it.

tools-don't-make-the-impact Its not the tools that create great things, its the application by the "craftsman" who makes wonders with them.

Always remember this when you are playing and handling your tools. You are the driver and where the vehicle will go is always in your hand and how skilful you are in it.

Same can be said for the slumdog film, there was nothing spectacular in the script, simple characters, simple scenes but the directors use of scene, screen play and  treatment made all the difference.... The camera, the technicians and the locations were all same that you will find in any Ram Gopal Verma's film, only thing that made slumdog great was its application.

So whenever you are looking at your tools, go forward with this attitude. You will surely win your Oscar!!!

related:

Search This Blog